| 1 |
Material: |
The shell is made of rolled plate, the thickness is 1.5mm, and the surface is sprayed with plastic. |
| 2 |
Lamp tube |
3 UV lamps British PRIMAC 5KW, 3 top lamps, respectively at different angles, the position, height, and angle of the lamp tube in the UV furnace can be adjusted, which is suitable for the ultraviolet light of various products The UV lamp has a wavelength of 320~400nm, and the life span of the UV lamp is guaranteed for 800~1000 hours. The conveying width is 500 mm. |
| 3 |
The vertical height between the conveyor belt and the ground: |
800mm. |
| 4 |
|
The conveyor belt adopts black mesh belt, which is resistant to ultraviolet rays, high temperature and durable. |
| 5 |
Cooling system |
using a fan to effectively discharge the heat generated by the UV lamp. |
| 6 |
Reflective cover: |
It is made of aluminum and is integrally formed with German alanod imported reflective lenses inside, which can increase the UV reflection efficiency by 38%. |
| 7 |
Control system: |
(1) Each group of lamps can be controlled independently.
(2) Each group of lamps can be equipped with an LCD timer, which can be reset to zero.
(3) Electrical part: use CHNT contact, CKC timing, OMRON relay, NIPPON timer and spring switch, etc
|
| 8 |
Speed control system: |
adopt Taiwan Delta frequency converter, stepless speed regulation, 0-10m/min. |
| 9 |
Safety devices: |
leakage circuit breaker, abnormal emergency switch, phase sequence protection, transformer, motor overload protection, control circuit fuse, etc., in line with national safety standards.
|
| 10 |
Features: |
(1) The UV section is insulated with double-layer steel plates, and the thickness of the insulation layer is 50mm, which can effectively reduce the cooling effect.
(2) Two-stage lamp power output switching, the range is 75%, 100% adjustable.
(3) The curing energy of UV lamp is 700～800mj/cm2.
(4) The curing range is 800～1200mw/cm2.
|
